Dies ist eine alte Version des Dokuments!
My Amiga Projects
Revive the AMIGA
GOTEK-Drive
Harddisk-Drive
- Status: Damaged, would be replaced by CompactFlash-Card
Connect AMIGA 2 Network/Fileserver/Internet
Plan is 2 use the Amiga as Original as possible with ROM 1.3 and WB 1.3 and connect it 2 a Raspberry PI Zero via RS232-Connection and Cable. For sure there are other Ways which maybe are Part of future Projects - Thinking about replacing CPU with PI-Storm - but i want it 2 get running with the original Hardware first.
* Project-Page: Networking
* Status: Pending
Add more Roms
Was initially planed but most probably would be canceled preferring 2 play arround with PiStorm
Status: Dismissed
PiStorm
Replace Original CPU with PI-Storm-Module and Raspberry PI Zero.
I know a PI3 or better would give better Performance, but i want 2 stay minimal, assuming that performance-gain with a Pi-Zero is more than enough.
Also strips away the Necessity for more physical Rom-Chips or EEproms, Soldering/Cabels and Kickrom-Switch
Should be possible 2 replace my Network-Connection as in Project above also but i would like 2 stick on this solution as i want 2 work with true Network-Speeds of those good old days via serial connection.
Status: Planned