amiga:projects [Gizmos Amiga Dokuwiki]

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.

====== My Amiga Projects ======

===== Revive the AMIGA =====

I recently digged out my Amiga of Childhood/Youth and want to revive it. 

[[amiga:hardware|It's a AMIGA 500 rev 5 with +512KB Ram-Card, external FDD and a external AlfaPower-HDD-Extension]]

As i have no hope that any Floppy-Disk-Data survived 30 years i'd replace the internal Drive with a Gotek. 

I also wanted to revive my 135MB Harddisk but it sounds damaged. 
==== GOTEK-Drive ====

UPDATE: Delivered 22.11.2025

  * ** Project-Page: [[amiga:projects:gotek|Gotek-Drive]]**
  * ** Status: WorkInProgress**

==== Harddisk-Drive ====

  * ** Project-Page: [[amiga:projects:hdd|Harddisk-Drive]]**
  * **Status: WorkInProgress**

===== Connect AMIGA 2 Network/Fileserver/Internet =====

Plan is 2 use the Amiga as Original as possible with ROM 1.3 and WB 1.3 and connect it 2 a Raspberry PI Zero via RS232-Connection and Cable. For sure there are other Ways which maybe are Part of future Projects - Thinking about replacing CPU with PI-Storm - but i want it 2 get running with the original Hardware first. 


  * **Project-Page: [[amiga:projects:networking|Networking]] **
  * **Status: Pending **



===== Add more Roms =====

Was initially planed but most probably would be canceled preferring 2 play arround with PiStorm

  * **Status: Dismissed**
===== PiStorm =====

Replace Original CPU with PI-Storm-Module and Raspberry PI Zero. 

I know a PI3 or better would give better Performance, but i want 2 stay minimal, assuming that performance-gain with a Pi-Zero is more than enough. 

Also strips away the Necessity for more physical Rom-Chips or EEproms, Soldering/Cabels and Kickrom-Switch

Should be possible 2 replace my Network-Connection as in Project above also but i would like 2 stick on this solution as i want 2 work with true Network-Speeds of those good old days via serial connection. 

  * **Status: Planned**