My Amiga Projects

I recently digged out my Amiga of Childhood/Youth and want to revive it.

It's a AMIGA 500 rev 5 with +512KB Ram-Card, external FDD and a external AlfaPower-HDD-Extension

As i have no hope that any Floppy-Disk-Data survived 30 years i'd replace the internal Drive with a Gotek.

I also wanted to revive my 135MB Harddisk but it sounds damaged.

UPDATE: Delivered 22.11.2025

• Project-Page: Gotek-Drive
• Status: WorkInProgress

• Project-Page: Harddisk-Drive
• Status: WorkInProgress

Plan is 2 use the Amiga as Original as possible with ROM 1.3 and WB 1.3 and connect it 2 a Raspberry PI Zero via RS232-Connection and Cable. For sure there are other Ways which maybe are Part of future Projects - Thinking about replacing CPU with PI-Storm - but i want it 2 get running with the original Hardware first.

• Project-Page: Networking
• Status: Pending

Was initially planed but most probably would be canceled preferring 2 play arround with PiStorm

• Status: Dismissed

Replace Original CPU with PI-Storm-Module and Raspberry PI Zero.

I know a PI3 or better would give better Performance, but i want 2 stay minimal, assuming that performance-gain with a Pi-Zero is more than enough.

Also strips away the Necessity for more physical Rom-Chips or EEproms, Soldering/Cabels and Kickrom-Switch

Should be possible 2 replace my Network-Connection as in Project above also but i would like 2 stick on this solution as i want 2 work with true Network-Speeds of those good old days via serial connection.

• Status: Planned