My Amiga Projects

• GOTEK-Drive - Status: Ordered
• Original 135mb HDD - Status: Damaged

Plan is 2 use the Amiga as Original as possible with ROM 1.3 and WB 1.3 and connect it 2 a Raspberry PI Zero via RS232-Connection and Cable. For sure there are other Ways which maybe are Part of future Projects - Thinking about replacing CPU with PI-Storm - but i want it 2 get running with the original Hardware first.

Raspberry PI works as Router and Fileserver (FTP)

There is a nice Manual wich seems suitable and Promising:

• Amigalove Forum-Thread
• Backup of Howto-Archive as Website already vanished (LHA-compressed Archive)

Status: Pending

Was initially planed but most probably would be canceled preferring 2 play arround with PiStorm

Replace Original CPU with PI-Storm-Module and Raspberry PI Zero.

I know a PI3 or better would give better Performance, but i want 2 stay minimal, assuming that performance-gain with a Pi-Zero is more than enough.

Also strips away the Necessity for more physical Rom-Chips or EEproms, Soldering/Cabels and Kickrom-Switch

Should be possible 2 replace my Network-Connection as in Project above also but i would like 2 stick on this solution as i want 2 work with true Network-Speeds of those good old days via serial connection.