Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- amiga:projects [2025/11/08 20:13] – gizmo
+++ amiga:projects [2025/11/24 13:35] (aktuell) – gizmo
@@ Zeile 3: / Zeile 3: @@
 ===== Revive the AMIGA =====
-  * GOTEK-Drive - Status: Ordered
+I recently digged out my Amiga of Childhood/Youth and want to revive it.
-  * Original 135mb HDD - Status: Damaged
-===== Connect AMIGA 2 Internet =====
+[[amiga:hardware|It's a AMIGA 500 rev 5 with +512KB Ram-Card, external FDD and a external AlfaPower-HDD-Extension]]
-Plan is 2 use the Amiga as Original as possible with ROM 1.3 and WB 1.3 and connect it 2 a Raspberry PI Zero via RS232-Connection and Cable.
+As i have no hope that any Floppy-Disk-Data survived 30 years i'd replace the internal Drive with a Gotek.
-There is a nice Manual wich seems suitable and Promising:
+I also wanted to revive my 135MB Harddisk but it sounds damaged.
+==== GOTEK-Drive ====
-  * [[https://www.amigalove.com/viewtopic.php?t=2667|Amigalove Forum-Thread]]
+UPDATE: Delivered 22.11.2025
-  * {{ :amiga:amiganos-complete.lha |Backup of Howto-Archive as Website already vanished (LHA-compressed Archive)}}
+  * ** Project-Page: [[amiga:projects:gotek|Gotek-Drive]]**
+  * ** Status: WorkInProgress**
+==== Harddisk-Drive ====
+  * ** Project-Page: [[amiga:projects:hdd|Harddisk-Drive]]**
+  * **Status: WorkInProgress**
+===== Connect AMIGA 2 Network/Fileserver/Internet =====
+Plan is 2 use the Amiga as Original as possible with ROM 1.3 and WB 1.3 and connect it 2 a Raspberry PI Zero via RS232-Connection and Cable. For sure there are other Ways which maybe are Part of future Projects - Thinking about replacing CPU with PI-Storm - but i want it 2 get running with the original Hardware first.
+  * **Project-Page: [[amiga:projects:networking|Networking]] **
+  * **Status: Pending **
+===== Add more Roms =====
+Was initially planed but most probably would be canceled preferring 2 play arround with PiStorm
+  * **Status: Dismissed**
+===== PiStorm =====
+Replace Original CPU with PI-Storm-Module and Raspberry PI Zero.
+I know a PI3 or better would give better Performance, but i want 2 stay minimal, assuming that performance-gain with a Pi-Zero is more than enough.
+Also strips away the Necessity for more physical Rom-Chips or EEproms, Soldering/Cabels and Kickrom-Switch
+Should be possible 2 replace my Network-Connection as in Project above also but i would like 2 stick on this solution as i want 2 work with true Network-Speeds of those good old days via serial connection.
+  * **Status: Planned**